Midi Wizard v1.0
by MidiKarval
(MidiKarval Website)
Owned by user Stacey

Download from the
Author's Website

 
Operating System: Windows Vista/XP
File Size: 1.1 MB
License: Demonstration (All Demo software)
License Conditions:

Fully functional for a 15 minutes period of time. It then expires and you have to remove and re-load it in your host to use it again. Registration: €10.00

System Requirements:

VST host application.

Last Updated: 2010-02-04
For more detail about software : Software Description
  View Midi Wizard v1.0 Screenshot

Software Description

Midi Wizard is a midi processor made for all keyboardists whose gear is “simply” a midi keyboard and a computer stored with VST instruments.

With Midi Wizard you can change the transmitting midi channel of your keyboard and/or transpose it on the fly, simply pressing a button and a key.

Open it in your VST host application, connect the host midi input to the Midi Wizard's midi input and its midi output to the midi input of a VST instrument, then:

  • Press and hold a button of your midi keyboard sending a CC message #105, set the desired transmitting channel pressing a key in the range C3 (channel 1) - D#4 (channel 16) and release the button: the chosen midi channel is shown in the Channel Changer's GUI. In order to come back to midi channel 1 (reset) simply press a button of your midi keyboard sending a CC message #106;
  • Press and hold a button of your midi keyboard sending a CC message #110, set the desired transpose interval with reference to the C3 key (midi note number 60) pressing the corresponding (upper or lower) key and release the button: the chosen transpose interval is shown in the Midi Wizard's GUI in terms of upper (+) or lower (-) semitones. In order to cancel the transposition (reset) simply press a button of your midi keyboard sending a CC message #111.

Of course, you can use only two buttons of your midi keyboad, sending respectively CC messages #105 and #110 and reset the transmitting channel to "1" and/or the transpose interval to "0" by pressing the C3 key.

You can change the CC messages used by Midi Wizard through the relevant drop lists in its GUI.

Syndicate content