PHA-979 allows you to apply an arbitrary phase shift to sound material. What is meant by the phase shift here is simultaneous shifting of all frequencies across the active frequency range of the signal by the given value in degrees. This is achieved by linear-phase design.

PHA-979 can be very useful during mixing sessions, especially when working with the sound material recorded through an array of microphones. In many cases this allows one to solve various phasing problems arising from the microphone placement chosen during the tracking session. In other cases this process may help one to align drums to each other and to align the bass to drums and other instruments bringing punch and time coherence not attainable by the ordinary time-aligning alone.

Beside phase shifting PHA-979 features an ordinary positive and negative time delaying that eliminates the need to move in-track events in the sequencer when doing time alignment over any set of recorded tracks.

PHA-979 also provides mid/side channel balance and panning controls that permit you to record stereo microphone pairs into a single stereo track without resorting to dual mono recording (on separate tracks) which usually becomes time-consuming requiring further editing.

Moreover, you can use functionality PHA-979 provides to setup headphone monitoring so that it closer resembles sound stage produced by stereo speaker monitoring.

Click to see the PHA-979 User Guide

Click to see the PHA-979 Primary User Guide

Features:

• Arbitrary signal phase control.
• Linear-phase design.
• Positive/negative time delaying.
• Delay time calculator.
• Mid/side channel balance control.
• Stereo output panning.
• Stereo and mono processing.
• 64-bit floating point processing.
• Preset manager.
• Undo/redo history.
• A/B comparisons.
• Contextual hint messages.

New in v2.2

• Plug-in initial loading time reduced.
• Crash problem on inserting the plug-in on a multi-channel track fixed.
• Parameter automation on AU Mac OS X now shows real parameter values.
• The "VST Function Sync" global switch was added that fixes crashes in some hosts (i.e. Tracktion).
• Preset "update" function implemented in the preset manager.
• "Density mode" implemented in level meters.
• Correlation meter's inter-band separation increased.
• Additional visual look variation settings added.