October 1999 Archive of Music Software Discussion & Help Page

Music Software Discussion and Help


Archive: October 1999



[ Archive: September 99] [ Archive: August 99] [ Archive: July 99] [ Archive: June 99] [ Archive: May 99] [ Archive: April 99] [ Archive: March 99] [ Archive: February 99] [ Archive: January 99] [ Archive: December 98] [ Archive: November 98] [ Archive: October 98] [ Archive: September 98] [ Archive: August 98] [ Archive: July 98] [ Archive: June 98] [ Archive: May 98] [ Archive: April 98]

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

Re: RECORD VOCALS VIA MIDI? (THROUGH DJX?)

Sorry,
You really can't use midi for analog sound like your voice. Midi only sends information to and from other midi devices that either tell the other midi device what to do, or receive information on what to do.
For example, a t.v. remote control does not send the picture or audio to the t.v.
It only sends a signal that tells the t.v to turn on or turn off, or to change a chanel. So, basically midi is a remote control signal through a cable.

You can find out more about the djx at the 13 inch djx users website.
http://www.geocities.com/dj_white_rice

Midi technical information

I visited your website and found the midi information and help I needed for my Yamaha DJX keyboard. Thanks for all the help you gave me in your DJX user support forums.

Re: Midi technical information

Your welcome! But remember I'm just one of many djx users providing technical support at the Official DJX users Group.

By the way: Our website is now longer listed at the web address you gave. That was a mirror. It's only available at our main website now.

http://www.geocities.com/dj_white_rice/

software enquiry

Hiya peoples,

Can you tell me what software I can buy to write songs with, i.e. sound samples (as in - funk, pop, europop, r&b, groove rythms, latin...) as I am a lyricist and would like to use sound samples to put music to my lyrics. I live on the Gold Coast, Queensland, Australia. I would really appreciate a reply and costs (or approx.). Thanks muchly, from Norella :-)

Live Player Software

I am looking for live midi,wav,mp3 player software.
I have looked at a lot of the programs out there on the net and as good as they are I am yet to find a program that handles the requirements of playing live on stage.
I am running a laptop onstage and I need a clean, easy to read interface that will run full screen. It needs to have single stroke key commands for start, stop and song choosing.
If anybody has any information on this type of program please email me at patch@winshop.com.au
Thanks
Graham Michell
Australia.

Re: Live Player Software

hey I am looking to do live webcasts. If you could tell me how to go about doing this I would be bery greatful
thanks
: I am looking for live midi,wav,mp3 player software.
: I have looked at a lot of the programs out there on the net and as good as they are I am yet to find a program that handles the requirements of playing live on stage.
: I am running a laptop onstage and I need a clean, easy to read interface that will run full screen. It needs to have single stroke key commands for start, stop and song choosing.
: If anybody has any information on this type of program please email me at patch@winshop.com.au
: Thanks
: Graham Michell
: Australia.

Music notation software

I need to buy music notation software to record
archives of a musician friend who has passed away. I am
researching the software world and need advice as to
the best in the market, easy to learn, on a
moderate budget, working with Windows 98.
Can anyone out there help???

Re: Music notation software

www.musedit.com

Very reasonably priced and full featured.

Easy learning curve.

Great support.

: I need to buy music notation software to record
: archives of a musician friend who has passed away. I am
: researching the software world and need advice as to
: the best in the market, easy to learn, on a
: moderate budget, working with Windows 98.
: Can anyone out there help???

Send songs via E-Mail???

I would like to attach some of my favorite songs to (love) letters to a friend. My guess is that I convert the track playing to a MP3 file, give it a name, save it to disk and then use the saved address in some fashion. Even if this is right, I don't know how or what to use to accomplish the MP3 conversion. Anybody who wants to can advise me. Thanks, John

Re: Send songs via E-Mail???

: I would like to attach some of my favorite songs to (love) letters to a friend.But I want to know how you can get a song from the web and put it on the e-mail,because I dont have the song on my media player. Thanks and try to answer me. Oh another thing I would like to know is if I look at a poem and it has a song and I want to put that song with that poem to send it to someone via e-mail how do I do it. Thank you. BYE. In the bottom I show you the link that the song is at and what poem it is.

Re: Send songs via E-Mail???

: I would like to attach some of my favorite songs to (love) letters to a friend. My guess is that I convert the track playing to a MP3 file, give it a name, save it to disk and then use the saved address in some fashion. Even if this is right, I don't know how or what to use to accomplish the MP3 conversion. Anybody who wants to can advise me. Thanks, John and the song i want is "you got it bad from usher please do me that favor thax john

Re: Send songs via E-Mail???

Hello there,

You'll find MP3 encoders, rippers and players in our <a href="http://www.hitsquad.com/smm/cat/MP3/">MP3</a> section. That'd be some big email though if you sent it.

Cheers
Geoff

: I would like to attach some of my favorite songs to (love) letters to a friend. My guess is that I convert the track playing to a MP3 file, give it a name, save it to disk and then use the saved address in some fashion. Even if this is right, I don't know how or what to use to accomplish the MP3 conversion. Anybody who wants to can advise me. Thanks, John

Techno song

Zup

Need BPM matching software that can record

I am in dire need of a program that can match beats by the use of a pitch shifter that can also record the mixdown. I want a program that is easy to use like Cool Edit Pro, which I use for mixing down multitrack recordings. The problem with Cool Edit Pro is that it does not change the pitch or tempo as easily as other DJ software like Digital 1200SL. Digital 1200SL and Virtual Turntables do not let you record. So I'm in a bind and need software fast...

Re: Need BPM matching software that can record

You can use any Wav Editor/recorder to record from VTT or DJ1200 etc. I personally use Wavelab and VTT. You'll need two SCs (and at least one being full duplex)to get the mixdown in stereo, though.

The only catch is that you need the processor speed to run both progs at the same time without glitches.

TotalRecorder is a low usage recorder (I believe it's available here), but a lot of people have trouble using it. I'm really not sure why, though, I've never had any problems with it.

You can stream the mixdown to a DAT or an Analog deck (obvious).

: I am in dire need of a program that can match beats by the use of a pitch shifter that can also record the mixdown. I want a program that is easy to use like Cool Edit Pro, which I use for mixing down multitrack recordings. The problem with Cool Edit Pro is that it does not change the pitch or tempo as easily as other DJ software like Digital 1200SL. Digital 1200SL and Virtual Turntables do not let you record. So I'm in a bind and need software fast...

Re: Need BPM matching software that can record

Thanks a bunch, nightfishing...that's the kind of info i needed!

RAM file to RA or WAV

I have an RAM formatted file that I eventually need to convert to a WAV file for a presentation. If I can get it to a RA file, I have downloaded software to get it to a WAV. Any suggestions????

Re: RAM file to RA or WAV

: I have an RAM formatted file that I eventually need to convert to a WAV file for a presentation. If I can get it to a RA file, I have downloaded software to get it to a WAV. Any suggestions????

I ran into the same problem and found that all you have to do is change the .ram extension on the file to .ra..........it sounds so simple, because it is. Now you can convert the .ra to .wav with so many converters out there. Have a good time.

Shawkat

Re: RAM file to RA or WAV

: I have an RAM formatted file that I eventually need to convert to a WAV file for a presentation. If I can get it to a RA file, I have downloaded software to get it to a WAV. Any suggestions????

An RAM file is a <b>R</b>eal <b>A</b>udio <b>M</b>eta file which doesn't contain audio - only instructions about what audio to play and how to access it.

This is explained in an article <a href="http://www.hitsquad.com/smm/news/9904_106/">Pseudo-streaming your music</a>

DJ Power

Can anyone recommend some DJ software (profi)?
Thanks.

Re: DJ Power

I've used Visiosonics 1200sl, VTT, BPM Studio and the new MJ STudio. VTT is still the best. the 1200 is great (way overpriced, though), very stable and easy to use - especially if you're used to using DualDenons. But, it lacks DSP support and I find it a little difficult to get comfortable with the feel of the interface.

MJ STudio is pretty much useless for serious mixing, at this stage. Looks promising, though.

BPM Studio was a big disappointment. Not as stable as any of the others. Cluttered layout doesn't help, either.

For under $50 bucks, VTT will do eberything you want and do it well.

Great support for plugins (ie BPM resolver - the best auto-beat counter, Audiostocker, Analogx Vocal Remover and Gmixon's Chromotron which will adjust tempo w/o changing pitch.)

You can check out all of these plugins on my site - in the VTT section.

http://thrill.to/nightfishing

hope this helps.

: Can anyone recommend some DJ software (profi)?
: Thanks.

VTT Rules, Try Tactile 12000

ive used VTT is a great ware, try using Tactile also

Cheaper Affordable Computers and Parts

Check out these sizzling computer bargains.

Desktop computers, laptops/notebooks as well as many components and parts.

Specials include complete systems, memory, hard drives, motherboards, CRT moniters, Web Cams, printers, programs, DVD burners, USB MP3 players, wireless, memory sticks, video cards, digital cameras to name a few.

The list goes on and the prices come down.

Interested in building your own computer system? Then insist on quality affordable components with a great backup service.

We offer the Best Computer Deals Anywhere - And same day shipping - worldwide.

<a href="http://www.cheaper-computers.com">http://www.cheaper-computers.com</a>

Need advice - record duets; PC output to stereo amp

Greetings - I'm looking at getting a sound card and software to do mainly the following: 1) have the output of the card patchable, with good quality, into my stereo so I can play out the room speakers, and, record to audio tape; 2) be able to record duets or trios with myself playing all the parts. On the 2nd point, I think I need a full-duplex sound card so I can record one track (I play classical music on the recorder), listen to that track on headphones while playing/recording the 2nd, etc. and have the parts all nicely sychronized. I'm leery about having to cut and paste the parts together. Perhaps I need some mixing software as well (Mixman?), but, am thinking that the software I would need might come with the as yet undetermined sound board.
I'd be pleased if someone could give me some suggestions, or just point me to a relevant FAQ.
Thanks,
Rod

sequencer with plug-ins automation on PC ?

What is great with Protools I've seen on a mac is the ability to automate plug-ins parameters .
Do you know other sequencer on PC I can use to do that ?
Thanks

Philippe

Help

Dear Sir
I have been searching for a notational musical software
easy for publishing musical books with text, please advise me ,what is the best program and how can I order it. Olso if there are programs which are capable
to record and write the DemiSemiTones or SemSharps and
SemFlats, It is important for our school and for publishing our Books.
You can email me on the same address, thanks for your help and time. Yours Naim Shdeed

How to Burn Laser disc to small disc

Can anyone tell me how to burn big laser disc to the small disc.

Magix-.sng to .wav conversion

I posted a similar message elsewhere,but not sure if its the correct place. I am in desparate need of assistance as I am scoring a feature film, and facing a major deadline to deliver a cd-r disc demo of the music. Here's my problem. Magix is a great program butlousy on support and explanation. I created my music in Music Studio V2000 which saves this as .sng I was able to convert this to a .mid file but am still not able to convert to .wav in order to burn to my CD-r
(Phillips 4x Re-writer). As I'm the Director of this $%$%#$@* project, and not the musical director (who's no help!) I need HELP!!!

Any advice on how to accomplish,with the least bit of aggravation, this process, I would greatly appreciate it. I need answers quickly. If you don't mind e-mailing me in addition to posting on this site, as I spent the better part of a day just finding this site!

Re: Magix-.sng to .wav conversion

just create a new Audio Track,set it up to record.
you can now play your Midi Tracks and record them onto the Audio Track,it will be saved as a wav file

hope this helps

Greetings
Greyscales

looking for a program

I am looking for a program that I can use to help me delete vocals from music to make my own personal soundtracks. Does anyone know of such a program?? Any & all help is appreciated.

First midi/rec software

I am in the market for my first piece of software to do some music writing. Ironically, I work in audio professonally (for TV post), but it seems that the equipment I am in the market for is very different that what I use at work. I have a windows 95 166 Megahertz PC with an ok sound card. I need to prove to myself that I will actually use this stuff before I re-equip and open the money pit <g>, so I am not looking to spend a fortune. a few hundred bucks maybe. Any suggestions? I would be very gratefull. Thanks, Chris. criss24@mindspring.com

Re: First midi/rec software

: I am in the market for my first piece of software to do some music writing. Ironically, I work in audio professonally (for TV post), but it seems that the equipment I am in the market for is very different that what I use at work. I have a windows 95 166 Megahertz PC with an ok sound card. I need to prove to myself that I will actually use this stuff before I re-equip and open the money pit <g>, so I am not looking to spend a fortune. a few hundred bucks maybe. Any suggestions? I would be very gratefull. Thanks, Chris. criss24@mindspring.com

Try Massiva - a freeware sequencer available here. Go to download area. This is a pretty cool piece of work and easy to get started in. Good luck.

Se

Where can I find a free midi driver?

Where can I find a free midi driver?

Re: Where can I find a free midi driver?

: Where can I find a free midi driver?

Re: Where can I find a free midi driver?

: : Where can I find a free midi driver?

i also need a free midi driver and realaudio player. Where can i download them free of charge?

Re: Where can I find a free midi driver?

at www.rolandcorp.com

Easy CD-Creator Deluxe 4.0

I recently bought Easy CD-Creator Deluxe 4.0 because my HP 7200i CD-Burner made clicking or popping noises on audio cds only. I was told that this software would solve the problem. I took out all the original Adaptec software that came with the burner and installed version 4.0. Now when I try to copy from my cd-rom , which is an Encore PC-DVD Dxr2 2nd generation, to my 7200i cd-burner and when it begins scanning the process will just freeze on a random track such as 1,3,or 5. The highest I have gotten is track 5. I have downloaded all the new software off of the internet to correct problems with my cd-burner and cd-rom. Before I tried the option cd copier. When I tried to make an audio cd using only the cd-burner drive by switching cds every 3 tracks, I got it to scan all the tracks but it just froze after writing 2 tracks. WHY CAN"T I GET THIS BLASTED THING TO WORK? It hasn't worked on audio cds since the day I got it. Is this software what I need? I would greatly appreciate any and all help. Just e-mail me at charlie4x4@yahoo.com.

Re: Easy CD-Creator Deluxe 4.0

: I recently bought Easy CD-Creator Deluxe 4.0 because my HP 7200i CD-Burner made clicking or popping noises on audio cds only. I was took out all the original Adaptec software that came with the burner and installed version 4.0. Now when I try to copy from my cd-rom , which is an Encore PC-DVD Dxr2 2nd generation, to my 7200i cd-burner and when it begins scanning the process will just freeze on a random track such as 1,3,or 5. The highest I have gotten is track 5. I have downloaded all the new software off of the internet to correct problems with my cd-burner and cd-rom. Before I tried the option cd copier. When I tried to make an audio cd using only the cd-burner drive by switching cds every 3 tracks, I got it to scan all the tracks but it just froze after writing 2 tracks. WHY CAN"T I GET THIS BLASTED THING TO WORK? It hasn't worked on audio cds since the day I got it. Is this software what I need? I would greatly appreciate any and all help. Just e-mail me at charlie4x4@yahoo.com.

Re: Easy CD-Creator Deluxe 4.0

where the hell can i download a copy of easy cd creator.

Easy CD-Creator Deluxe 4.0

Where i can download Easy CD Cretor 4.0
Free?

Re: Easy CD-Creator Deluxe 6.0

: Where i can download Easy CD Cretor 6.0
: Free?

Re: Easy CD-Creator Deluxe 6.0

: Where i can download Easy CD Cretor 6.0
: Free?

Re: Easy CD-Creator Deluxe 4.0

: I recently bought Easy CD-Creator Deluxe 4.0 because my HP 7200i CD-Burner made clicking or popping noises on audio cds only. I was told that this software would solve the problem. I took out all the original Adaptec software that came with the burner and installed version 4.0. Now when I try to copy from my cd-rom , which is an Encore PC-DVD Dxr2 2nd generation, to my 7200i cd-burner and when it begins scanning the process will just freeze on a random track such as 1,3,or 5. The highest I have gotten is track 5. I have downloaded all the new software off of the internet to correct problems with my cd-burner and cd-rom. Before I tried the option cd copier. When I tried to make an audio cd using only the cd-burner drive by switching cds every 3 tracks, I got it to scan all the tracks but it just froze after writing 2 tracks. WHY CAN"T I GET THIS BLASTED THING TO WORK? It hasn't worked on audio cds since the day I got it. Is this software what I need? I would greatly appreciate any and all help. Just e-mail me at charlie4x4@yahoo.com.

Re: Easy CD-Creator Deluxe 4.0

: : I recently bought Easy CD-Creator Deluxe 4.0 because my HP 7200i CD-Burner made clicking or popping noises on audio cds only. I was told that this software would solve the problem. I took out all the original Adaptec software that came with the burner and installed version 4.0. Now when I try to copy from my cd-rom , which is an Encore PC-DVD Dxr2 2nd generation, to my 7200i cd-burner and when it begins scanning the process will just freeze on a random track such as 1,3,or 5. The highest I have gotten is track 5. I have downloaded all the new software off of the internet to correct problems with my cd-burner and cd-rom. Before I tried the option cd copier. When I tried to make an audio cd using only the cd-burner drive by switching cds every 3 tracks, I got it to scan all the tracks but it just froze after writing 2 tracks. WHY CAN"T I GET THIS BLASTED THING TO WORK? It hasn't worked on audio cds since the day I got it. Is this software what I need? I would greatly appreciate any and all help. Just e-mail me at charlie4x4@yahoo.com.

Re: Easy CD-Creator Deluxe 4.0

necesito el programa , ya chao

Re: Easy CD-Creator Deluxe 4.0

necesito el programa , ya chao

Re: Easy CD-Creator Deluxe 4.0

After installing Easy CD Creator 4.0, my system will not let me use my DVD players at all. When I insert a disk into my DVD, the system reboots. This has continued to happen after uninstalling Easy CD Creator. After it happened on my Hitachi DVD, I thought that maybe my player had died, so I install a toshiba unit and the same thing happened to it. Neither of these units functions to this day. If anyone can explain this or how I might get my DVD's working again, I would appreciate it. I'm definately not using this software ever again.

Re: Easy CD-Creator Deluxe 4.0

yo those hp cd burner suck....sell it and get a smart and friendly, or a memerox is even a good one

Re: Easy CD-Creator Deluxe 4.0

i completely understand your frustration...
i also installed version 4.0 and when i did all the system tests, this software told me that my 40 speed cd rom was only capable of 254kb per second digital audio extraction. yet in the previous version (3.5) it was 867kb per second.
also the cdr test won't test past 1 speed recording. i don't understand how two different versions of the same program can give such conflicting results. maybe it's only been designed for scsi use. any way i've gone back to winoncd. i don't have any problems with that.

all this doen't answer your question but i thought you might like to know that you are no alone in your frustration

Re: Easy CD-Creator Deluxe 4.0

: i completely understand your frustration...
: i also installed version 4.0 and when i did all the system tests, this software told me that my 40 speed cd rom was only capable of 254kb per second digital audio extraction. yet in the previous version (3.5) it was 867kb per second.
: also the cdr test won't test past 1 speed recording. i don't understand how two different versions of the same program can give such conflicting results. maybe it's only been designed for scsi use. any way i've gone back to winoncd. i don't have any problems with that.

: all this doen't answer your question but i thought you might like to know that you are no alone in your frustration

I too have the hp7100 and had no problem with 3.5
but now have glitches with 4.0 after many call
to tech one of them implied they will have a down
load soon to correct the probem and all registered
users will be e-mailed