October 2002 Archive of Music Software Discussion & Help Page

Submitted by hq_admin_smm on Tue, 10/01/2002 - 04:00.

Music Software Discussion and Help


Archive: October 2002



[ Archive: September 2002] [ Archive: August 2002] [ Archive: July 2002] [ Archive: June 2002] [ Archive: May 2002] [ Archive: April 2002] [ Archive: March 2002] [ Archive: February 2002] [ Archive: January 2002] [ Archive: December 2001] [ Archive: November 2001] [ Archive: October 2001] [ Archive: September 2001] [ Archive: August 2001] [ Archive: July 2001] [ Archive: June 2001] [ Archive: May 2001] [ Archive: April 2001] [ Archive: March 2001] [ Archive: February 2001] [ Archive: January 2001] [ Archive: December 2000] [ Archive: November 2000] [ Archive: October 2000] [ Archive: September 2000] [ Archive: August 2000] [ Archive: July 2000] [ Archive: June 2000] [ Archive: May 2000] [ Archive: April 2000]

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

Re: iMac and recording

Posted by Craig on Mon, 11/11/2002 - 11:52.

Ok....I have been recording for years on a Yamaha MT2X multitrack. I think its time to get into digital recording. I have an IMac G4..I know I can buy recording software...Cakewalk, Anvil etc. What I need to know is what I need to get the music into the computer from my mixing board or bypass the mixing board all together. Any help would be greatly appreciated.
Craig

Re: iMac and recording

Posted by James Lumgair on Tue, 11/12/2002 - 16:54.

Hi Craig
Im not sure tis is what you want but I got the griffin iMic (around £40) which ment I could put an input in from my mixing desk. It worked for me and I have a G3 imac.
James

Split File

Posted by Michael Villaneuve on Fri, 10/11/2002 - 05:07.

I need a program that can take like a 60 minute MP3 file, and slpit into say 12, 4 minunte songs. Is there any programs that can do this??

Michael
http://www.m6.net

Re: Split File

Posted by Ryan Tan on Fri, 10/18/2002 - 07:04.

Try Split MP3 from http://www.whizinc.com/

: I need a program that can take like a 60 minute MP3 file, and slpit into say 12, 4 minunte songs. Is there any programs that can do this??

: Michael
: http://www.m6.net

help please help mmjb soundcard problem

Posted by mark on Thu, 10/10/2002 - 23:28.

HELP SOS. I have no sound now and every time i try to play any of my down-loads it comes up with a message saying problem with MMJB SOUNDCARD, it wont tell me what the problem is. It was letting me make up cds but now it wont let me do that. PLEASE PLEASE can someone HELP me

Re: help please help mmjb soundcard problem

Posted by rahimpireva on Fri, 11/26/2004 - 15:59.

help me please i wont tonow what can i do for this problem, mmjb soundcard problem please help me if you want hawe nice nighet.

Re: help please help mmjb soundcard problem

Posted by Rick on Sun, 06/01/2003 - 13:24.

You need the drivers that load your sound card driver. I lost mine when I used windows media player- maybe codec???

: HELP SOS. I have no sound now and every time i try to play any of my down-loads it comes up with a message saying problem with MMJB SOUNDCARD, it wont tell me what the problem is. It was letting me make up cds but now it wont let me do that. PLEASE PLEASE can someone HELP me

Need help with Karoke CD+G

Posted by Godwin Perera on Thu, 10/10/2002 - 20:46.

I use power karoke software to make cdg's. I only can here the music but the words I cannot see. Please sone can help me that how to make my own karoke cd proper way and what are the files I have to put in the CD.

Thanks

Godwin

Depends on your burner....

Posted by Holler on Sat, 10/12/2002 - 17:43.

Use daemon toolz and cloneCD, and the instructions from www.karaokeplayground.co.uk

Use the help page for using a Non-Compatible burner.

Need help with CDG

Posted by Godwin Perera on Thu, 10/10/2002 - 20:46.

I use power karoke software to make cdg's. I only can here the music but the words I cannot see. Please sone can help me that how to make my own karoke cd proper way and what are the files I have to put in the CD.

Thanks

Godwin

Need help with CDG

Posted by Godwin Perera on Thu, 10/10/2002 - 20:45.

I use power karoke software to make cdg's. I only can here the music but the words I cannot see. Please sone can help me that how to make my own karoke cd proper way and what are the files I have to put in the CD.

Thanks

Godwin

digitalis

Posted by schleierenkraft on Thu, 10/10/2002 - 16:59.

<A HREF="http://www.cnn.com/2002/TECH/ptech/10/09/fuelcell/index.html"><IMG SRC="http://www.diggingdog.com/plantgrafs4/digitalis.gif"></A>

Re: correction. (damn those pesky web addresses!)

Posted by schleierenkraft on Thu, 10/10/2002 - 17:47.

<A HREF="http://www.cnn.com/2002/TECH/internet/10/10/digitalradio.ap/index.html"><IMG SRC="http://www.diggingdog.com/plantgrafs4/digitalis.gif"></A>

Re: correction. (damn those pesky web addresses!)

Posted by Nigel on Thu, 10/10/2002 - 22:46.

Looks good. Now, how about a cure for cancer and world poverty?

: <A HREF="http://www.cnn.com/2002/TECH/internet/10/10/digitalradio.ap/index.html"><IMG SRC="http://www.diggingdog.com/plantgrafs4/digitalis.gif"></A>

null

Posted by null on Tue, 07/20/2004 - 05:26.

null

old answers to old questions

Posted by schleierenkraft on Fri, 10/11/2002 - 16:51.

Cure for cancer:

1) Vegetarianism
2) Organic Permaculture instead of chemical-based agriculture
3) Stop manufacturing plastics, polymers, and dyes.
4) Stop burning synthetic and fossil fuels
5) Stop placing electromagnetic and radioactive substances or devices near people.
6) Stop producing tobacco products
7) Stop producing drinking alcohol
8) Reduce consumption of salts
9) Reduce or eliminated fried foods
10) Stop chlorinating and flouridating drinking waters
11) Stop illegal (and some legal) dumping of toxic materials into the soil and water
12) Don't create genetically modified plants or animals (whoops, too late).
Many of them have totally unpredictable physical and chemical properties. Documented cases exist of genetic alterations made from non-toxic materials becoming unexpectedly toxic.

13) Support and protect pre-industrial or anti-industrial cultures.
14) Pay attention to non-toxic solutions to pest problems proposed by
biologists, anthropologists, and biophysicists.
15) Stop voting for ignorant leaders who politics and alliances reveal disrespect or hostility towards community well-being. Guess who decided to allow more poison into the nation's drinking water supply? Mr. Bush, yes.
16) Stop allowing nations to buy and trade "points" for environmental safety. You can't "buy" clean elements or safety into existence. It takes actual action.

World Poverty:

Food:
1) Vegetarianism
2) share all agricultural knowledge past and present worldwide and encourage the sharing
3) Stop governments from using control of food as a weapon
4) make knowledge of food cultivation mandatory for everyone, worldwide. Specifically, organic permaculture
5) encourage cultures of sharing, and don't discourage cultures of sharing
6) consider Pascifist Anarchy a legitimate option for human culture.

Employ similar plans for Shelter, Water, Clothing, Medicine, and Educations supporting them.

7) stop believing technology will solve all your problems
8) stop believing that politics aren't inherently hostile
9) stop believing in religions that are political

Re: old answers to old questions

Posted by Nigel on Mon, 10/14/2002 - 20:06.

Very true. I just used organicly-grown fruit for 24hrs to get over a nasty cold. On other fronts, I found a wonderful slab of metallic grunge called 'Diet Creeps' by the wonderful Fudge Tunnel. Anyone else a fan o these English guys?

: Cure for cancer:

: 1) Vegetarianism
: 2) Organic Permaculture instead of chemical-based agriculture
: 3) Stop manufacturing plastics, polymers, and dyes.
: 4) Stop burning synthetic and fossil fuels
: 5) Stop placing electromagnetic and radioactive substances or devices near people.
: 6) Stop producing tobacco products
: 7) Stop producing drinking alcohol
: 8) Reduce consumption of salts
: 9) Reduce or eliminated fried foods
: 10) Stop chlorinating and flouridating drinking waters
: 11) Stop illegal (and some legal) dumping of toxic materials into the soil and water
: 12) Don't create genetically modified plants or animals (whoops, too late).
: Many of them have totally unpredictable physical and chemical properties. Documented cases exist of genetic alterations made from non-toxic materials becoming unexpectedly toxic.

: 13) Support and protect pre-industrial or anti-industrial cultures.
: 14) Pay attention to non-toxic solutions to pest problems proposed by
: biologists, anthropologists, and biophysicists.
: 15) Stop voting for ignorant leaders who politics and alliances reveal disrespect or hostility towards community well-being. Guess who decided to allow more poison into the nation's drinking water supply? Mr. Bush, yes.
: 16) Stop allowing nations to buy and trade "points" for environmental safety. You can't "buy" clean elements or safety into existence. It takes actual action.

: World Poverty:

: Food:
: 1) Vegetarianism
: 2) share all agricultural knowledge past and present worldwide and encourage the sharing
: 3) Stop governments from using control of food as a weapon
: 4) make knowledge of food cultivation mandatory for everyone, worldwide. Specifically, organic permaculture
: 5) encourage cultures of sharing, and don't discourage cultures of sharing
: 6) consider Pascifist Anarchy a legitimate option for human culture.

: Employ similar plans for Shelter, Water, Clothing, Medicine, and Educations supporting them.

: 7) stop believing technology will solve all your problems
: 8) stop believing that politics aren't inherently hostile
: 9) stop believing in religions that are political

Republicans cause cancer

Posted by Macintorvald on Tue, 10/15/2002 - 12:25.

Interesting note about that band. I think I've heard them once. Not sure.
About the politics: I just read an associated press article revealing that U.S. Republicans are trying to modify a pending bill to allow oil companies to produce more MBTE and to stop calling it harmful.

Although your newspaper won't tell you, MBTE is known to cause cancer in humans. Right now Republicans want to make it easier for greedy people to put a known cancer-causing poison, MBTE, into the air, soil, and water.

Cancer is not a mystery. Greed causes cancer.
Mr. Bush probably will support his fellow Republicans against fellow humankind. So, you see, the war is being fought all around. Politicians and corporations have a death wish for us all, just like other psychos and fanatics.

John Kerry & John Edwards or bust

Posted by Lesser Evil on Mon, 09/20/2004 - 04:48.

: Interesting note about that band. I think I've heard them once. Not sure.
: About the politics: I just read an associated press article revealing that U.S. Republicans are trying to modify a pending bill to allow oil companies to produce more MBTE and to stop calling it harmful.

: Although your newspaper won't tell you, MBTE is known to cause cancer in humans. Right now Republicans want to make it easier for greedy people to put a known cancer-causing poison, MBTE, into the air, soil, and water.

: Cancer is not a mystery. Greed causes cancer.
: Mr. Bush probably will support his fellow Republicans against fellow humankind. So, you see, the war is being fought all around. Politicians and corporations have a death wish for us all, just like other psychos and fanatics.

recording with cubasis vst 3.0

Posted by jeff on Thu, 10/10/2002 - 16:46.

i need help will cubaiss vst 3.0 work with a aopen motherboard ak77-333 onboard sound ? plus the screen isnt the same as on the box can anybody help?

recording with cubasis vst 3.0

Posted by jeff on Thu, 10/10/2002 - 16:45.

i need help will cubaiss vst 3.0 work with a aopen motherboard ak77-333 onboard sound ? plus the screen isnt the same as on the box can anybody help?

drivers for Roland PMA-5

Posted by Ilya on Thu, 10/10/2002 - 00:27.

drivers for Roland PMA-5

This popular thread has been given its own page : drivers for Roland PMA-5

in search of an software instrument extarcator

Posted by lebec on Wed, 10/09/2002 - 13:12.

meaning
the software records an analogic CD on my PC view the various instruments tracks and gives me the ability to take off whatever instruments i want. Or for instance only keep the drums or bass etc...
Does anyone know if it exists
thanx
JM

Re: in search of an software instrument extarcator

Posted by Jason on Wed, 10/09/2002 - 23:15.

Sorry, no such technology has yet been devised. The
human brain is still the only thing that can separate
the sounds of different instruments.

You can get partial separation with the use of EQ. For
example you can eliminate high frequencies to mostly
end up with low drums and bass - not perfect but you
can then use this in a mix and "cover up" the others
instruments with more prominent sounds at higher
frequencies and volumes.

Jason.

: meaning
: the software records an analogic CD on my PC view the various instruments tracks and gives me the ability to take off whatever instruments i want. Or for instance only keep the drums or bass etc...
: Does anyone know if it exists
: thanx
: JM

Re: in search of an software instrument extarcator

Posted by DOUG on Wed, 10/09/2002 - 13:37.

: meaning
: the software records an analogic CD on my PC view the various instruments tracks and gives me the ability to take off whatever instruments i want. Or for instance only keep the drums or bass etc...
: Does anyone know if it exists
: thanx

: JM
hay i would like to know if you can convert karoake cds i have around 2500 songsto down load to my lap top and how?

recording a sample in realtime?

Posted by phil on Wed, 10/09/2002 - 09:26.

i need to know how to record a sample while listening to other samples and my drum machine so it plays the way i recorded it.im using korg electribe es-1 sampler and korg electribe em-1 drum machine.i know my sampler can't do that but if i knew of a program or another piece of equipment i could buyim sick of making samples then trying to match them up after i make them.see i play piano and id like to make samples as if i were playing along with the beat and other samples.

Direct X PlugIns PEOBLEM!!!

Posted by DAVIDE on Wed, 10/09/2002 - 05:24.

Can i write automations with DirectX plug ins?
I use Pc computer and Cubase SX
Thanks, DAVIDE

How is XP limiting Gigastudio's access to RAM?

Posted by Dana Harden on Wed, 10/09/2002 - 03:05.

If anyone has a solution to this problem, it would save me weeks of rebuilding my system: Gigastudio 160 only uses about a third of the 756 mb of Ram. I have a Hewelett Packard zt1180 laptop (PIII 1200mhz) with a factory installation of windows XP home. I put it in standard PC mode, then per Hammerfalls bulletin, took it out of Standard PC by doing a SYS overlay with a windows disk. Then I added service pak 1 and did tons of audio optimization of normal user accessible stuff and sys config start up items per blackviper.com. I then Installed a 512 chip of ram in slot 2 along with a 256 in slot 1 and did the auto sys config. Then I reversed the slots the chips were in and did no further auto sys config of ram.

The problem is that when I go over about 29% of memory in Giga 160 I get messages saying there is not enough memory to allocate to that instrument. Tascam says they have had this with a few OEM installations of XP (Steinberg & Hammerfall DSP Cardbus drivers also crashed HP's installation of XP). Why does this happen and is there a solution besides re-installation of XP?
Also, my 2x2 midisport usb midi interface would install both the usb & midi drivers, would show up fine under sound video & game controllers, as well as usb controllers, but would not show up in sound & audio control panel/ audio under midi playback. This is on the heavily loaded IRQ 9. Can it be moved on a laptop and is this related to the above problem. I am not using the printer port. Midiman tech support had been helping me install this for 2 weeks without success. Would I have the same problem with another interface?
Thanks for any help in advance. It is going to be so incredible to play Gigasamples and to record outside of my studio!!! I should be able to record 4 live audio tracks via the Mona plus 8 more mic preamps through the amazing Roland vm-3100 pro digital mixer and it's additional DIF-AT interface via 8 channels of ADAT light pipe!!!!!!!!!!!!!! If anyone is interested in the mixer, it is discontinued and being blown out, as of a few weeks ago, at zzounds.com for $440.
The rest of my system is a Mona cardbus audio interface, Cubase vst 32 5.1r1, the latest Gigastudio for xp streaming from a Soundchaser built externafire wire Granite case & 7200 rpm drive, and an aweful lot of patience and hope that this will work.
Jammin' with my nano orchestra to go,
Dana Harden

Karl Moore

Posted by Karl Moore on Wed, 12/08/2004 - 21:05.

<a href="http://www.karlmoore.com/">Karl Moore</a>

Cheaper Affordable Computers and Parts

Posted by Alexander Cotter on Wed, 12/08/2004 - 17:29.

Check out these sizzling computer bargains.

Desktop computers, laptops/notebooks as well as many components and parts.

Specials include complete systems, memory, hard drives, motherboards, CRT moniters, Web Cams, printers, programs, DVD burners, USB MP3 players, wireless, memory sticks, video cards, digital cameras to name a few.

The list goes on and the prices come down.

Interested in building your own computer system? Then insist on quality affordable components with a great backup service.

We offer the Best Computer Deals Anywhere - And same day shipping - worldwide.

<a href="http://www.cheaper-computers.com">http://www.cheaper-computers.com</a>

Recording from minidisc to the computer

Posted by Curtis on Wed, 10/09/2002 - 01:56.

I want to record some music off of my minidisc and put it on my computer so I can make a CD. What software is good for those kind of jobs?

Re: Recording from minidisc to the computer

Posted by bruce on Mon, 03/15/2004 - 10:36.

well this is 2 years late, but download "total recorder" - its a live recording program that reads your soundboard. combine that with a line in cord from your minidisc and you should be set

: I want to record some music off of my minidisc and put it on my computer so I can make a CD. What software is good for those kind of jobs?

Profession CD music made by me

Posted by dave on Wed, 10/09/2002 - 01:48.

I need a program, i have tons but it think i want something for finishing audio before i put it on the cd. i make the whole songs with my guitar. they always sound to low and just put together sloppy. they sound good on the cpu.

moonlight breeze

Posted by charlette reynolds on Thu, 01/13/2005 - 21:09.

i need a way to make a cd but i dont want to go to a recording studio.i have my songs and all that but i just need a way to make them on a cd for me & my friends

Re: Profession CD music made by me

Posted by Nigel on Thu, 10/10/2002 - 22:58.

So you're saying they sound good on the computer but crap on the disc? Maybe you need to experiment with some mastering software, such as T-Racks.

: I need a program, i have tons but it think i want something for finishing audio before i put it on the cd. i make the whole songs with my guitar. they always sound to low and just put together sloppy. they sound good on the cpu.

Band/MP3 hosting - your opinions

Posted by Geoff on Wed, 10/09/2002 - 00:12.

Hi all,

I'm thinking of exploring some of the options out there for those of you that want to have your music hosted on sites such as MP3.com.

What sites do you recommend? Have you any great stories to tell or horror tales?

I'd appreciate some feedback on this.

Cheers
Geoff

Sonar Freezes with Roland XV-88

Posted by SteveMcWhirter on Tue, 10/08/2002 - 23:12.

After I load SonarXL and then turn on my Roland XV-88 keyboard, Sonar freezes up. Using WinMe on a Dell P-4 with 256Mb memory. I guess it is a midi-driver, but where to start to resolve this?

umm help

Posted by alysa on Tue, 10/08/2002 - 19:52.

im a 14 year old girl and i have nothin good in my life i only love to sing so i wanna be a singer and i want someon to help me to be come somethin with sing and i dont wanna rap or sing like brittney im not in to that shit i have my own look i dont like to be like everyone else so if u can plz help me to make the only thing keepin me going in this world is my music can u help me to make my own music plz do help and e-mail me if u wanna help thanks

~alysa~

Re: umm help

Posted by inkbutterfly on Thu, 10/10/2002 - 05:18.

Though I have not the sort of advice you are after Alysa, I wish you the best of luck in your singing endeavors. If you want it enough, it shall be. The only advice I can give you is to get out there and talk to people - network!

: im a 14 year old girl and i have nothin good in my life i only love to sing so i wanna be a singer and i want someon to help me to be come somethin with sing and i dont wanna rap or sing like brittney im not in to that shit i have my own look i dont like to be like everyone else so if u can plz help me to make the only thing keepin me going in this world is my music can u help me to make my own music plz do help and e-mail me if u wanna help thanks

: ~alysa~

help

Posted by darren on Tue, 10/08/2002 - 19:07.

when i try 2 burn music my pc says that there is no device detected what do i need 2 do

Re: help

Posted by Nigel on Tue, 10/08/2002 - 22:21.

You do have a CD Burner don't you?

: when i try 2 burn music my pc says that there is no device detected what do i need 2 do

Re: help

Posted by de Koning Danny on Thu, 01/30/2003 - 04:50.

This week I had the same problem in Windows Media Player : "No device detected. Press F5 to refresh.".

Just a deinstall of some burning-software resolved it.
In my case I removed "Padus Easy CD Creator".

Sound Card

Posted by Ruth Coffey on Tue, 10/08/2002 - 17:30.

Please could somebody tell me the most common causes of sound card not working. I am a computer idiot, so please use words of less than 3 syllables!
Thanks

Live MP3 streaming jam sessions?

Posted by Ray Totti on Tue, 10/08/2002 - 11:59.

Would it be possible for musicians (say 2 to begin with) to jam over the web using MP3 files? I assume both have at least 512k connections. I've had a look at some VB controls, but haven't found anything useful. Can an MP3 file be created directly or is an intermediate .WAV file always required? (shows how much I know!). If there was a DLL available that recorded the MP3 files then that'd be a big start. Any help/suggestions greatly appreciated.

TALK

Posted by RAY on Tue, 10/08/2002 - 07:44.

HI ANY GIRLS OUT THERE

Online Recording of rm, ram files

Posted by Balasubramanian on Tue, 10/08/2002 - 07:26.

Respected Sir

I am working as a System Admin, in Sri Venkateswara Institute of Technology, i am in need to download somr of rm & ram extension files from the net, these files are not downlodable but can be listern online.

I want to know that is there any freeware software that can capture these Video/Audio rm files & can store it in to the HDD.

I would be very much thankful to you, if you help me in this regard.

Thanking you,

Balasubramanian.C

Re: Online Recording of rm, ram files

Posted by Pat Singletary on Tue, 10/08/2002 - 20:12.

The "rm" file is just a text file telling Real Player where to find the "ram" file which does contain the audio. If there is a link to the "ram" file on the page, just right click and choose the "save link as" option. If the link is to a "rm" file, do the same to save the "rm" file. Then open the "rm" file up in any text editor, and you should be able to get the address of the "ram" file. You may (no guarantee that you will be granted access to it) be able to paste in the address to your browser. If it works, you should then be able to save the "ram" file from your browser. Hope this helps.

: Respected Sir

: I am working as a System Admin, in Sri Venkateswara Institute of Technology, i am in need to download somr of rm & ram extension files from the net, these files are not downlodable but can be listern online.

: I want to know that is there any freeware software that can capture these Video/Audio rm files & can store it in to the HDD.

: I would be very much thankful to you, if you help me in this regard.

: Thanking you,

: Balasubramanian.C

Re: Online Recording of rm, ram files

Posted by Jutta Kullmann on Mon, 11/11/2002 - 01:32.

Can these files be converted so I can burn a CD. Right now NERO and Roxio cannot burn CD with this file extension.

Thank you,
Jutta

: The "rm" file is just a text file telling Real Player where to find the "ram" file which does contain the audio. If there is a link to the "ram" file on the page, just right click and choose the "save link as" option. If the link is to a "rm" file, do the same to save the "rm" file. Then open the "rm" file up in any text editor, and you should be able to get the address of the "ram" file. You may (no guarantee that you will be granted access to it) be able to paste in the address to your browser. If it works, you should then be able to save the "ram" file from your browser. Hope this helps.

: : Respected Sir

: : I am working as a System Admin, in Sri Venkateswara Institute of Technology, i am in need to download somr of rm & ram extension files from the net, these files are not downlodable but can be listern online.

: : I want to know that is there any freeware software that can capture these Video/Audio rm files & can store it in to the HDD.

: : I would be very much thankful to you, if you help me in this regard.

: : Thanking you,

: : Balasubramanian.C

Re: Online Recording of rm, ram files

Posted by Nigel on Tue, 10/08/2002 - 22:45.

You've got this the wrong way round. The ram file points to the ra file.

: The "rm" file is just a text file telling Real Player where to find the "ram" file which does contain the audio. If there is a link to the "ram" file on the page, just right click and choose the "save link as" option. If the link is to a "rm" file, do the same to save the "rm" file. Then open the "rm" file up in any text editor, and you should be able to get the address of the "ram" file. You may (no guarantee that you will be granted access to it) be able to paste in the address to your browser. If it works, you should then be able to save the "ram" file from your browser. Hope this helps.

: : Respected Sir

: : I am working as a System Admin, in Sri Venkateswara Institute of Technology, i am in need to download somr of rm & ram extension files from the net, these files are not downlodable but can be listern online.

: : I want to know that is there any freeware software that can capture these Video/Audio rm files & can store it in to the HDD.

: : I would be very much thankful to you, if you help me in this regard.

: : Thanking you,

: : Balasubramanian.C

The best synth... is it reaktor?

Posted by Nigel on Tue, 10/08/2002 - 01:26.

So what do you think?

« first‹ previous…789101112131415next ›last »